If you have a fire or water emergency, please call us now at (828) 255-4535

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

5 Steps for Replacing a Leaking Toilet

10/28/2019 (Permalink)

It's important to use the appropriate wrench to disconnect a supply line

5 Steps for Replacing a Leaking Toilet

When your home has a leaking toilet in Weaverville,NC, your first reaction may be to check that the water supply line is leaking. If this is not the problem it may be time to replace the gasket. Here are five steps to follow.

1. Turn Off the Water

One of the first steps to replace an old toilet gasket, is to turn off the water before beginning. In many cases the water supply line will be attached to an off valve which is located in the bathroom.

2. Disconnect Supply Line

Once the water is turned off you can drain the toilet by holding the leaver down, and then began to disconnect the water supply line. It's important to use the appropriate wrench for the job in order to prevent any damage to the fittings.

3. Move Toilet Aside

After the water is drained and the supply line disconnected you can begin to move your leaking toilet away from the base. At this point you may wish to check for any water damage as result of the leaking, and contact a local water damage restoration service to conduct any necessary repairs.

4. Replace the Gasket

Once any water damage to the floor has been repaired, you can continue with the toilet repair. At this time remove the old gasket, scraping away any remaining residue, and replace it with a brand new one. Ensure the new gasket is properly set, and then return the toilet to its original position. If you have any questions about this process a professional may be able to help.

5. Reconnect the Water

After the gasket has been replaced, and a toilet reinstalled you can begin to reconnect the water line. Ensure that all the fittings are correctly tightened, and remember to contact a professional if you have any questions.
Following these five steps may allow you to replace the gasket and stop a leaking toilet. Turn the water off before beginning the replacement process, and ensure all the fittings are correctly tightened when you are done. Remember, if you find water damage during this process it's best to contact a local professional for help.

Other News

View Recent Posts