If you have a fire or water emergency, please call us now at (828) 255-4535

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Archived Mold Remediation Blog Posts

MOLD-B-GONE

5/19/2023 (Permalink)

Mold is a common problem that can cause significant damage to your home and pose health risks to your family. Implementing preventative maintenance measures is key to reducing the growth of mold in your home. In this blog post, we present you with a catchy acronym, "MOLD-B-GONE," that encapsulates essential steps for preventative maintenance. And remember, if you need assistance, don't hesitate to call SERVPRO of Asheville, your trusted mold remediation experts.

M - Monitor Moisture Levels: Keep a close eye on the moisture levels in your home. Use a hygrometer to measure humidity levels regularly. Maintain indoor humidity below 45% to discourage mold growth. Use dehumidifiers in damp areas such as basements, bathrooms, and laundry rooms to control excessive moisture.

O - Open Windows for Ventilation: Proper ventilation is crucial in preventing mold. Open windows regularly to allow fresh air to circulate throughout your home. This helps reduce humidity levels and prevents stagnant air, which can contribute to mold growth. Use exhaust fans in bathrooms, kitchens, and laundry rooms to remove excess moisture and promote air circulation.

L - Leaks: Address Immediately! Leaks are a major culprit for mold growth. Act promptly if you discover any leaks in your home. Whether it's a dripping faucet, a leaking pipe, or a roof leak, fix the issue immediately. Repair leaks, replace damaged pipes, and patch up roof leaks to prevent water intrusion and subsequent mold problems.

D - Direct Water Away from Your Home: Ensure proper drainage around your home to prevent water from seeping into your foundation and causing moisture issues. Clean and maintain your gutters regularly to avoid clogs that can lead to water overflowing and pooling around your home's exterior. Proper grading around your property directs water away from the foundation, reducing the risk of moisture infiltration.

B - Bathroom Maintenance: Bathrooms are prone to moisture buildup, making them susceptible to mold growth. Take preventive measures by properly maintaining your bathroom. Use exhaust fans during and after showers to remove excess humidity. Wipe down wet surfaces, dry bathroom mats, and promptly fix any leaks or plumbing issues.

G - Get Professional Inspections: Regular professional inspections can help identify hidden sources of moisture and potential mold issues. Engage the expertise of SERVPRO of Asheville, who can perform thorough mold inspections, assess the extent of any existing mold growth, and provide remediation solutions tailored to your home's needs.

O - Optimize Airflow: Promote adequate airflow throughout your home to prevent moisture from settling. Arrange furniture and belongings to allow air to circulate freely. Keep closets well-ventilated by leaving space between clothes and ensuring proper air circulation. Avoid overcrowding items in rooms or storage areas to minimize the risk of mold growth.

N - No Moisture-Trapping Materials: Be mindful of using moisture-trapping materials in areas prone to dampness. Avoid wall-to-wall carpeting in basements or bathrooms, as carpets can trap moisture and provide a favorable environment for mold growth. Opt for moisture-resistant flooring options such as tiles, hardwood, or laminate.

E - Eliminate Excess Condensation: Condensation can lead to mold growth if left unaddressed. To reduce condensation, insulate cold surfaces, such as windows and pipes, to prevent them from attracting moisture. Use weather-stripping on windows and doors to reduce air leaks that can cause condensation. Utilize proper ventilation and heating systems to maintain consistent indoor temperatures.

Call SERVPRO of Asheville for Help! If you encounter mold growth despite your preventive efforts, don't hesitate to call the professionals at SERVPRO of Asheville. Our expertise in mold remediation ensures efficient and thorough removal of mold, restoration of affected areas, and guidance to prevent future mold issues.

In Conclusion, by following the "MOLD-B-GONE" acronym for preventative maintenance, you can significantly reduce the risk of mold growth in your home. Implement these preventive measures, stay vigilant, and if you need expert assistance, remember to call SERVPRO of Asheville. Together, let's keep mold at bay and ensure a healthy and mold-free living environment for you and your loved ones!

3 Things You Should Know About Mold Damaged Paintings

5/24/2019 (Permalink)

Mold can grow on paintings

Mold Cleaning Is an Option When Mold Growths Affects Paintings

Mold can grow on a multitude of surfaces and can damage various items in homes in Swannanoa,NC. When paintings have been affected by mold growth, however, you may be unsure whether or not mold cleaning is an option.

1. Why Does Mold Grow on Paintings?

Many people often don’t think works of art would be affected by mold, though it is a common occurrence. Mold growth is likely to affect a painting in a variety of circumstances, including:

  • If a painting sustains water damage and the piece is not quickly dried and treated
  • When mold growth starts on a wooden frame and spreads to the remainder of the painting
  • If pieces are stored in attics, basements or other humid environments

2. Should You Attempt To Remove Mold Yourself?

Although you may be tempted to remove mold from a painting on your own, specialized mold cleaning methods are often necessary. Removing mold from a painting by yourself could result in the painting becoming further damaged. Warping, discoloration and disintegration may occur if the piece isn’t treated properly. Additionally, attempting to treat a painting in an environment where high levels of mold spores are present may cause the mold to reappear a short time later.

3. How Are Works of Art Restored?

The extent of the mold damage often determines whether or not any item, including a painting, can be restored. Mold remediation specialists will remove the piece from its original environment to ensure mold does not continue to grow. Then, professionals examine the painting before using specialized methods and treatments to remove mold. In some instances, conservationists may need to repaint areas of a painting that have flaked away.

When your home has been damaged, you can feel overwhelmed by uncertainty. However, knowing that mold cleaning can improve the state of damaged paintings can help to bring you peace of mind.

The Types Of Equipment Used by Mold Remediation Specialists

1/22/2019 (Permalink)

Our team will clean and treat the mold in your home.

Types of Safety Gear

Handling a small case of mildew or mold in your Asheville, NC  home might not seem like much of a reason to cover up in full-fledged protective gear. However, for the professionals in the business of mold damage and remediation, protective equipment is entirely essential. Here are some of the more common types of safety gear worn by specialists in the field, including everything from face masks to durable shoes.

Heavy-Duty Gloves

Coming into direct contact with mold or mildew can be hazardous, making a reliably safeguarded pair of gloves a necessity for mold cleanup. These gloves can be made from a variety of materials, such as:

  • Nitrile
  • Polyurethane
  • Neoprene
  • Polyvinylchloride (PVC)
  • Natural rubber

The type of gloves chosen should depend on the type of mold involved and the extent of the damage, though any pair should extend upwards from the hand along the forearm for maximum coverage.

Fully-Equipped Respirator Masks

There’s nothing more important than covering the face when dealing with mold, as airborne spores can be inhaled or absorbed quite easily. Face masks can range anywhere from minimal coverage using simple sealed goggles and a common N-95 respirator, to full-face respirators with strong HEPA filters for advanced protection. 

Disposable Clothing

Extreme mold removal jobs generally require clothing that can be easily disposed of afterwards. Trained mold remediation technicians often go for full body suits and shoes made of protective yet breathable materials, sealing areas around the ankles and wrists for added measure. Respirator face masks and other durable head and foot coverings finish off the look for the ultimate protective shield against contact with mold.

The use of such intense precautionary gear goes to show just how harmful the effects of contact with mold can be. For this reason, it’s imperative that any mildew or mold found in your Asheville, NC  home is handled and removed by professionals with protective equipment that’s suited for the task. 

3 Tips on Preventing Mold in Your Rental Home

11/30/2018 (Permalink)

Mold growing behind the drywall after a pipe break in Biltmore,NC

Mold Prevention

It’s important that your rental home is comfortable and safe, but mold in your home in Biltmore,NC, can affect both the appearance of your home as well as the safety of the home. However, prioritizing mold prevention can help you keep mold from growing in your home.

1. Identify Likely Causes

Even if there are not currently signs of mold growth in your rental home, it can be helpful to be aware of where mold would most likely grow. For example, basements and bathrooms are likely to have mold due to higher levels of humidity. Pipe breaks can also result in water damage, which causes mold to grow quickly. In order to prevent mold, it’s also often helpful to make sure all appliances in your rental home are working properly and fix any leaks as soon as possible.

2. Eliminate Moisture

Mold grows wherever there is moisture and eliminating moisture in your home is often an important step in mold prevention. In areas near water, like kitchens, bathrooms or basements, make sure to remove water from any spills or leaks. Fans can also help to increase the airflow and keep the environment drier. In particularly humid climates, it may help to use a dehumidifier in your rental home.

3. Lower the Heat

Though you may not think about the temperature in your home affecting mold, mold tends to grow in warm environments. If you are able to lower the heat in your home, this can often help to decrease the humidity in your home. However, in your pursuit to prevent mold, you generally don’t want to turn off the heat entirely as this could decrease the airflow and make it easier for mold to grow.

Mold prevention can help you keep your rental home looking its best while also keeping the home safe, ultimately saving you the stress, money and time of having to remove mold. If your rental home is affected by mold, however, many people find it helpful to work with mold remediation professionals.

To Test or Not To Test: Detecting Mold in Your Home

9/12/2018 (Permalink)

Testing mold in your home or business to find the severity of the damage

As a homeowner, you probably take great pride in being able to care for your home yourself. You generally have the knowledge and the skill to keep it clean and safe for your family. Certain problems, however, such as mold growth, may require professional help. You need a certified industrial hygienist to conduct the mold testing and, if a mold problem is found, a mold remediation specialist to take care of it.

Inspection Techniques

When the CIH arrives at your home in Asheville, NC, he or she will go through the process of analyzing the air quality in your home. The CIH will perform three main techniques:

• Conduct a visual inspection
• Measure moisture in the air
• Compare baseline outdoor air samples to indoor air samples

Two results of mold testing can be indicative of a problem. First, if the mold spores of a particular species are more highly concentrated in the indoor air than in the outdoor air, they are probably feeding off something and thus multiplying at a more rapid rate than usual. Second, if there is a species of mold found inside that is not found outside, this, too, can indicate a problem.

DIY Techniques

Many home improvement stores sell kits so that their customers can conduct DIY mold testing in their homes. More often than not, however, a mold kit is a waste of money. The kit simply tests for the presence of mold. Without fail, the results are going to be positive. Mold is everywhere. Without first establishing a baseline test of mold concentration found outdoors, no indoor test is going to tell you anything useful.

If you suspect that there is a mold problem in your home, you are better off having a CIH conduct the mold testing rather than trying to do it yourself. The professional will get more accurate results which leads to your problem getting resolved more quickly.

For more on Asheville click here

Mold Damage Asheville - Mold Testing in Asheville

8/28/2018 (Permalink)

Molds grow best in warm, damp, and humid conditions, and spread and reproduce by making spores.

Asheville Mold Testing 

When water damage has struck your home, you could also have mold. Mold growth and mold spores form and thrive where moisture is readily available. Asheville molds form especially on water damaged ceilings, floors, walls. 

Mold Testing 

A professional mold remediation company in Asheville can perform mold testing to determine the extent of your mold damage. Insurance companies may not cover services for mold testing, so check to be sure. A mold inspector collects samples from your home and sends them to a lab for testing. 

Lab testing can confirm mold testing. The mold professional then has a level of mold in your home and what locations that tested positive for mold growth. These can be treated, cleaned, or removed depending on the severity of the damage. A mold testing expert can determine the best course of action to take to rid yourself of dangerous and toxic mold in Asheville

Mold restoration experts in Asheville know exactly where to look for mold in your home. They also know that mold is often hidden in many areas throughout the home and even be present in the air. Fiber optic technology can help mold experts find mold behind walls and underneath floors. Further, a hygrometer detects amounts of moisture. You could conduct mold tests on your own but many times self-test kits fail to detect the presence of mold spores or mold levels in your home or business accurately. Mold can also be dangerous to dispose of on your own. Remember; you can always call a mold remediation expert for help. 

Locally Owned Company with National Resources

Mold can cause smelly odors and not to mention it can cause health effects. It is important to remediate mold quickly whenever you have had water damage or flood damage. When you have mold damage needs in Asheville, Black Mountain, Candler, Fairview, or the surrounding areas Call SERVPRO of Asheville East at (828) 255-4535 today! 

Tips for Ridding Plants of Mildew

5/16/2018 (Permalink)

Mildew is a form of mold that grows primarily on living plants. Your Asheville, NC shrubs, indoor plants or crops may be susceptible to plant mildew. While this form of mold usually does not spread to your home, you may still want to work with a mold remediation team to address the issue as soon as possible. Mildew can actually act as a parasite and kill the plants it is on. To save your greenery, keep these tips in mind.

• Determine the mildew type. Mildew growth usually falls into one of two categories. It is either powdery or downy. Downy growth usually only affects a particular type of plant, such as grape or tomato, but powdery can affect any type of plant. Determining the type of mildew you're dealing with can help you figure out how you need to get rid of the growth.
• Avoid mildew cleaners. While you may be tempted to spray your plants with cleaners advertised for getting rid of mildew, this can actually do more harm to your vegetation than good. Before you spray any cleaners, make sure they are designed for use on plants.
• Use natural elements. Sunshine, water and outdoor air can help your potted flower survive the plant mildew. Direct sunlight allows your vegetation to dry out. Mildew, like mold, needs excess moisture to thrive. You can use water to remove the mildew from the surface of the leaves. Use moderate amounts of water to ensure you don't make the moisture problem worse. Outdoor air is another great way to get your greenery to self-adjust to normal moisture levels.
• Be careful when watering your plants. One common cause of mildew growth is trapped water on leaves. While you need to water your vegetation, you should try to put the appropriate amount of water near the roots rather than on the leaves.

Getting rid of plant mildew can help you keep your indoor and outdoor greens healthy and thriving. Removing the growth and controlling moisture is a great place to start. Visit http://www.SERVPROashevilleeast.com for more information on mold. 

Mold Cleaning and Remediation: Best Practices To Follow

4/25/2018 (Permalink)

Mold in a residential property.

If you discover black mold or any other sort of fungus in your building, don’t assume that you know the right thing to do. Chances are that some of the DIY mold cleanup procedures you’ve been told to use are wrong, and they could put you and your building’s occupants at risk. There are three sets of mold standards professional adhere to that you should know about:

• EPA standards
• OSHA standards
• IICRC standards

EPA and OSHA Standards for Mold Cleanup

The U.S. Environmental Protection Agency and the Occupational Safety and Health Administration have their own approaches to handling mold that they suggest building owners and Asheville, NC mold remediation experts adhere to:

• Building owners should not attempt to clean up spaces larger than 10 square feet on their own.
• Because an HVAC system can easily become contaminated with mold, the ductwork and units should be inspected and cleaned thoroughly.
• If flooding was caused by a sewage backup or if the water is otherwise contaminated, it should be cleaned up by a professional only.
• If you are concerned about how the water or mold may affect your health, contact a professional.

IICRC Mold Standards

When it comes to mold remediation efforts, the team you hire should adhere to IICRC’s standards. Those standards differ from EPA and OSHA’s in a few ways. The greatest difference in methods is the way in which these organizations test for mold. The IICRC rejects the EPA’s method for detecting mold, which involves a visual assessment. Instead, it utilizes the “Indoor Fungal Ecology” test, following the three Cs:

• Condition
• Class
• Category

A remediation expert who adheres to this methodology should look for conditions conducive to mold growth, quantify the water damage and categorize the type of water as either clean water, gray water or black water. By following these three steps, a professional should be able to effectively remediate the problem.

Every mold remediation expert adheres to different mold standards. The important thing is to ensure that the professional you hire follows guidelines appropriate to your situation. Ask about a company’s approach before making the final hire.
Visit http://www.SERVPROashevilleeast.com for more information on mold.

The Benefits of a Professional Mold Inspection

3/25/2018 (Permalink)

Mold damage at this Fairview home was discovered when a bathroom tile found coming off of the wall.

If your home has the telltale musty odor of mold, you may be tempted to take matters into your own hands and conduct mold testing yourself with a take-home kit. Do these kits accurately assess the state of mold in your home, though? Experts in Asheville, NC who have been trained and certified are more likely to make an accurate assessment during their mold inspection.

Mold Is Everywhere

Every home has mold. There are many places spores are present:

• Indoor air
• Outdoor air
• Furniture upholstery
• Wooden surfaces
• Window treatments
• Other surfaces

All your DIY mold test kit is going to tell you is that your home contains mold, which is already a given. If you suspect you have a serious mold problem, an environmental hygienist should be hired to conduct mold testing and pinpoint the problem.

Inspection Is Key

The detection of mold is only a small part of the certified hygienist’s job. What a mold kit cannot do is provide the visual inspection, which is the most vital part of getting to the root of the problem. These tests can be interpreted many ways. When professionals in Asheville, NC test for mold, they use the information they get from the test as a starting point to arrive at their ultimate diagnosis. The discovery of the condensation, poor ventilation, a cracked foundation, water damage or inferior drainage systems they find gives them more useful information than the test will show.

If you are worried enough about whether you have a mold problem to attempt your own mold testing, you are worried enough to call a professional environmental hygienist. Taking care of your mold issues in a safe and timely manner is too important not to enlist the help of someone who can make an accurate assessment that far surpasses the results you will get from a mold kit. The inspector can then advise you on the next steps you need to take to remedy the problem. Visit http://www.SERVPROashevilleeast.com for more information on mold. 

How To Deal With Mold Until a Professional Can Remove It

2/21/2018 (Permalink)

In just 24 hours, mold can develop within your commercial building in Asheville, NC. You need to address this right away before black mold starts to grow, which is much more dangerous. You should leave mold cleanup to the professionals, but it may take a couple hours for someone to come out. In the meantime, there are steps you can take to prevent the mold from escalating further.

1. Shut Off the Building’s HVAC System

You may see mold on drywall and assume it is localized. However, that patch actually releases various spores into the atmosphere, and they can spread to various parts of the building through the air conditioning system. However, it is still good to air out the affected room, and you can open up windows to promote circulation. Additionally, you can also bring fans into the room to promote adequate airflow.

2. Keep People Out of the Room

Whether there is black mold in the basement or a bathroom, you want to put up caution signs informing people to stay out until a professional comes. It is dangerous to be in a room with a significant moisture problem, and you do not want to put your employees in harm’s way.

3. Do Not Apply Bleach to the Mold

You may think you will be helping the mold cleanup crew by applying bleach to the affected area beforehand. For starters, bleach is not as effective at removing mold as most people think. In fact, there are some circumstances where bleach will actually exacerbate the problem. Bleach is also toxic, and you need to be wary of breathing in any fumes.

The best thing you can do when there is black mold in your building is to stay out of its way until a professional crew comes around. Mold is considered an emergency, so you probably will not have to wait long. Visit http://www.SERVPROashevilleeast.com for more information on mold.

Don’t Let Mold Drive You Out of Your Home

12/15/2017 (Permalink)

Don’t Let Mold Drive You Out of Your Home

As the primary cause of residential mold growth in Asheville, NC unanticipated water incursions may have a variety of sources. Mold needs this kind of moisture to thrive, and it can spread throughout an entire home in under 48 hours. With these facts in mind, mold prevention is the key to stopping its destructive tendencies when unexpected water damage occurs.

Where Does Mold Come From?

Major flooding can wreak havoc on both the interior and exterior of your house. Building materials and household items such as carpet, rugs, walls and furniture retain moisture even after the water has been cleared from your property. However, significant natural disasters aren’t the only way that this organism can find its way into your home. Several other smaller events can result in dangerous mold growth:

Leaky pipes
Seepage through walls or roofs
Excessively damp indoor air

Mold needs three things to encourage its growth: abundant moisture, food sources and a hospitable surface to host it. Water damage sets the stage, but organic substances, including cellulose-based materials such as wood, cardboard, paper facing on drywall and even wallpaper, serve as ideal nourishment for this type of fungus.

What Kind of Destruction Can Mold Cause?

Mold digests organic material, then spreads both in search of food and to reproduce new colonies. Common impacts include an unpleasant “earthy” aroma, discoloration to affected areas and eventually weakening of structural integrity.

What Mold Prevention Steps Can I Take?

A quick response is vital if you wish to preserve the condition of your home after leaks, climate control malfunctions, flooding or other potential sources of water damage. Your first step should be to immediately contact a water removal and restoration company in Asheville, NC. Meanwhile, shut off your home’s HVAC system and fans, avoid affected indoor areas, and do not attempt any cleanup or removal on your own. These tips not only preserve your health and safety but leave the way clear for the pros to do their job and get you back into your home. Visit http://www.SERVPROashevilleeast.com for more information on mold.

The Proper Way to Handle Mold Issues

8/23/2017 (Permalink)


The Proper Way to Handle Mold Issues

Mold damage occurs because of moisture, humidity, and heat. Mold growth is common following water damage such as a flood, but it’s not uncommon to find mold damage behind walls after a leak inside the walls or even a slow leak from an exterior pipe. The issue with mold damage and mold growth is it’s not always visible to home and business owner. This means mold in the home can grow for months before anyone is wiser, and commercial mold damage might go unnoticed for months. Even if the issue isn’t black mold, mold growth is dangerous.

There might be some signs people notice before they realize mold damage is a problem. Dry rot, a smelly odor, the frequent use of deodorization, and even the presence of fungus and mildew in bathrooms and basements. Another problem is many signs of mold in the home and commercial mold damage are ignored when signs like mildew and fungus are present in bathrooms and basements. Too many homeowners and business owners assume it’s natural to find mildew and/or fungus in these rooms, but it’s anything but normal.

Identifying Potential Mold in the Home and/or Commercial Mold Damage

Home and business owners looking to see if there is any mold damage in their home or in their business might miss the signs if they’re not familiar with them. Aside from dry rot, smelly odor, additional deodorization techniques not working well, and even mildew and fungus, there are many signs. Mold removal might be necessary when any of these issues are found.

Professional remediation and mitigation are always the best option when commercial mold damage or mold in the home is located. One of the most common signs of mold growth behind walls is the presence of dry rot. While dry rot doesn’t always indicate mold growth behind the walls, it’s a sign there is or was water damage or moisture in the home at some point.

A smelly odor is another big sign of mold growth. This smelly odor typically has a musty scent to it. Home and business owners might use deodorization to get rid of it before realizing it’s not entirely effective. It’s the use of professional deodorization with professional equipment a restoration company offers that gets rid of this smelly odor permanently.

Another common issue people face is the assumption that mold isn’t a problem if it’s not black mold. It’s not just black mold home and business owners must take seriously. All mold is problematic. All mold has the potential to cause serious damage to a home or business, and it must be handled accordingly.

Handling Mold Damage Accordingly

Remediation, mitigation, and mold removal services with the help of a professional restoration company are all requirements when mold is located anywhere. A restoration company has the correct equipment to properly handle mold removal, to dry damp areas, and to prevent mold from occurring again. Mitigation and remediation aren’t an option, but there are a few things home and business owners can do while waiting on a restoration company to appear.

Everyone can perform their own small form of mitigation and remediation while waiting for professional help. Without damaging any of the mold or attempting mold removal of the DIY variety to prevent the further spread of mold spores, home and business owners can begin removing water completely. They can shut down the air or heat to prevent mold spores from being distributed throughout the home faster and more efficiently, and they can leave the mold alone.

DIY mold removal is never a good idea. It’s only going to make the situation worse. Mold growth behind the walls could be black mold, but the truth is all mold growth behind the walls, visible in any room, or anywhere else requires the professionalism of a restoration company. Hiring professionals is the only option to prevent further mold growth and damage. Call the pros to help with the removal of mold and to prevent more expensive damage later.
Visit http://www.SERVPROashevilleeast.com for more information on mold.

The Problems with Mold and Mildew

7/25/2017 (Permalink)


The Problems with Mold and Mildew

A professional restoration company is necessary for mold removal. People will try to tell you that you can remove mold yourself. This is not true or advisable. If you disturb the mold without following the proper procedures that only a restoration company is capable of because they have the necessary training, solutions and equipment, you will spread mold spores into your home. Mold growth can occur within as little as 48 hours after a home is flooded or otherwise experiences excessive moisture. To avoid mold growth, water must be immediately and thoroughly removed.

Mold in Home

It might be common to see mold in the home, but mold in the home presents too many issues for it to be ignored. It cannot be cleaned with bleach or scraped away. Without professional mitigation, mold and mildew will continue to increase and cause serious adverse effects in the house.Contact a restoration company as soon as possible. Besides mold in the home, commercial mold damage is also a concern.

Commercial Mold Damage

Commercial mold damage has serious impacts as well. Numerous employees working under one roof with mold can constantly feel ill. With weakened immune systems, viruses are more likely to infect people, causing multiple sick days. Commercial mold damage needs to be dealt with immediately.

Dry Rot

Dry rot involves wood that has been deteriorated from a type of fungus. Dry rot affects the structural integrity of a home because the solid structure and strength of wood has been compromised. Dry rot causes wood to crumble. It can spread in a home that has excessive moisture, which can be caused by floods, the aftermath of fires, inadequate vapor barrier protection, leaks, inadequate air ventilation and excessive use of humidifiers. Fungus mitigation should be sought immediately to preserve the home's structure. It can stun people to think that they would need water mitigation after a fire, but this is one major cause for water damage and mold damage.

Black Mold

Black mold is a concern, but this is the case for any type of mold. Some black mold is toxic, but other types of mold are toxic as well. If you notice black mold or any other type of mold in your home, contact a restoration company immediately to do an inspection.

Mold Growth Behind the Walls

Once mold begins to grow in a home, it can spread to the entire home quickly. Sadly, mold growth can also occur behind walls. Mold growth behind walls can be a real concern because mold continues to grow despite being hidden. In the case of toxic black mold, you could become increasingly ill without even knowing the cause behind it. It is common to have mold growth behind walls when pipes leak. Exterior walls of a home that share piping with an outside source are subject to freezing. When pipes freeze, pipes burst and leak at a later point.

The Problem with Water Damage

Mold damage most often occurs in porous surfaces, which is why mold damage occurs after a home incurs water damage. Water damage causes mold damage because water distorts surfaces, which creates the perfect atmosphere for mold to grow in the home. Mold damage occurs rather quickly.

Deodorization

One giveaway for mold growth behind the walls is a musty, smelly odor. However, it's important to note that not all mold produces a smelly odor. You might be tempted to use deodorization methods to combat your smelly odor, but until mold and mildew are effectively removed, deodorization will not work, and your home will suffer from smelly odors. Deodorization does not work because the mold is still alive and continuing to grow.

Fungus Mitigation and Remediation

Fungus and mildew mitigation are necessary in a home. Mildew is also a health concern. Remediation is the process of stopping or reversing damage. Mold removal is a form of remediation. Only a professional remediation company can adequately help you with your mold issue. Mold removal is a must. Without mold removal, a home will continue to grow more mold because mold spores fly throughout the air searching for other places to grow. Mold growth will continue until you contact a professional mold remediation company.
Visit http://www.SERVPROashevilleeast.com for more information on mold.

How To Deal With Mold Damage In Your Home

6/29/2017 (Permalink)


How To Deal With Mold Damage In Your Home

Mold flourishes in damp, warm environments. Eliminating mold might appear simple, and in many cases, it might be a basic procedure. However, if the mold damage is extensive, you might require the services of a mold remediation consultant. It can be hard to find mold if it is growing in the hidden areas. Mold has a musty smell that can cause irritations and respiratory problems. Some people suffer from mild allergic reactions while others develop some serious health complications. Mold remediation and mitigation are instrumental when it comes to alleviating this problem.

Cleaning up

You cannot succeed in the mold removal process without undertaking a thorough cleanup. The secret to dealing with the mold damage is to tidy up and remove the mold immediately to stop it from spreading out and becoming harder to eliminate. Tidy your heating system during mold removal since the HVAC device can distribute the spores in the house. Run your vacuum cleaner over the areas where mold has begun to develop. Instead of covering the furnishings with polyethene and tape, remove them from the house while undertaking this operation. Routine cleansing can also keep the mold away from the kitchen, bathroom, and shower. Instead of exposing those near you to the mold spores, the specialists have the necessary devices and abilities to remove the mold in home finishes and prevent such infestations in the future. Before you start using the pressure washer to address the mold damage, wear the appropriate clothing and seal the zone with a protective covering to contain the spores in the working area. If you see the signs of commercial mold damage on the drywall, floors, or ceiling, you need to hire a mold removal specialist to stop the problem. Besides the mold remediation process, mitigation is critical when it comes to preventing the commercial mold damage in the future. While dealing with the commercial mold damage, look out for the fungus and mildew that have a smelly odor that might call for deodorization.

Ventilation

A good ventilation system is the key to mold removal. If your ventilation system is circulating the air, the mold and mildew cells will not flourish in your home. If the mold damage has started to affect the plaster or wood surfaces, you might have to remove the top layer and refurbish it with a material of your choice. Tiles are appropriate since they do not absorb water. Since the tiles are easy to clean, eliminating the mold on a tiled surface is quite easy. A direct exposure to mold over a prolonged amount of time can initiate a series of allergic reaction. Avoid living in the musty conditions, and if the damage is extensive, you need to relocate as the specialists deal with the infestation. Use your HVAC system to air-dry your house. Reducing the humidity levels can also help in combating the problem. Air-conditioning and ducts can often conceal mold, and it is important to have your ductwork checked. If mildew and mold develop on the wooden surfaces, air and heat can solve the problem. Increasing the airflow and the temperatures can keep the indoor environment fresh and dry and eliminate the mold in home drywalls. A constant who handles both the remediation and mitigation can work to your advantage. Without deodorization, you cannot get rid of the smelly odor that comes from the fungus and mildew and mold in home surfaces.

While bleach can exterminate the mold easily, it will not permeate the porous surfaces. Sodium bicarbonate and vinegar are instrumental when it comes to eliminating various types of mold. The commercial mold damage consultants should not use the corrosive chemicals during the mold remediation and mitigation to prevent ruining the finishes of your home. The fungus and mildew have a smelly odor that you cannot eliminate by deodorization. The deodorization of the fungus and mildew will not eliminate the smelly odor.
Visit http://www.SERVPROashevilleeast.com for more information on mold damage.

Home Tips for a Moldy House

5/19/2017 (Permalink)


Home Tips for a Moldy House

Having a healthy home is almost everyone’s dream, and there is nothing more irritating than mold. The fungus grows in damp areas like drainage systems and re-cleaning it all the time can be a tiresome job. The mold damage caused in households is an eyesore, and the smelly odor can be hard to put up with. There are many ways to achieve mold removal and here are some useful tips.

It is important to find a professional mold remediation service to deal with mold in home. Various companies can help you to get rid of mold in home. However, most people prefer to try home remedies. If you have an allergy to fungus or cannot stand the smelly odor, however, it's advisable to ask an expert to help you with the mitigation. When dealing with commercial mold damage, experts may use deodorization to help them work without choking on the smelly odor.

Keeping materials dry in the house is also a safe method of mitigation. The fungus thrives in areas with high moisture content. You can reduce moisture by fixing leaky joints and ensuring your clothes are completely dry before folding them.

The air scrubbing equipment is synonymous with riding the mildew fungus but before buying one, confirm that it is HEPA approved as those are the kind that can eliminate even the source particles. Mildew grows in most bathrooms, and it is important to air the room out.

Neglected areas can also accumulate fungus especially in areas large enough to cause commercial mold damage. This kind of mold is smelly implying that it will be easy to know its source. In most cases, mold may grow under carpets, ceiling boards, and cushions. The first step in remediation of this level of mold damage will be to open up every available avenue of ventilation. Then, get rid of the moldy surface. After this, wrap it up in plastic for cleaning or getting rid off. Then scrub away the surface mold. Vacuum the surface thoroughly then leave uncovered for the moisture to completely dry off before returning the carpet or cushion on it.

If the problem is on the walls, a mildewcide paint works greatly in mitigation of mold damage. If you live in an area that is prone to moisture or you have the problem of managing moisture, the paint is a must have. On areas where the paint cannot work, like on tile borders, one will need to try other forms of remediation like buying mildew cleaner or frequently using detergent for scrubbing the areas as a mold removal method.

Apart from bringing salads to life, vinegar also has the power to kill mold and could be used in deodorization. This is because, t does not leave an after-smell of itself or the mold when used in mitigation of mold damage. The fact that it is a mild acid is enough to suppress the growth of mildew from the cleaned out area for some time. For these reasons, vinegar wash is a great mitigation technique.

Another safe method of mold removal is using baking powder. The baking agent has many hacks under its name, and mold remediation is one of them. Water and baking soda solution sprayed on the surface then scrubbing is an effective remedy for mold in home areas.

Serious cases of mold in a home can lead to losses that can reduce the value of the house or increase the cost of home insurance policies. While deodorization can help mask the smelly odor, people can easily tell if the room is moldy.

Hydrogen Peroxide is a great mold removal agent that could be used to combat commercial mold damage. It is an antifungal agent that kills the fungus down to its spores. What's more, Hydrogen Peroxide is versatile and can be used anywhere in the house. From the kitchen to the bathrooms, there is no limit to where it can be used.

When carrying out mold remediation, it is important to be adequately prepared and protected. Subsequently, do not engage in any form of mold removal while bare-handed or without wearing protective eyewear. Undertake deodorization when dealing with commercial mold damage. The spores are a hazard to many people.
Visit http://www.SERVPROashevilleeast.com for more information on mold removal.

What to Know About Mold Remediation and Removal

4/24/2017 (Permalink)

What to Know About Mold Remediation and Removal

A mold is a fungus that grows in the form of a multicellular strand structures called hyphae. There can cause hazards and food spoilage. They are generally larger than other types of fungi species. The difference between other forms of microbial growth organisms is that molds are larger, complex and grow to be very long.


Examples of molds include:


Dry rot
Fungus serpula
Lacrymans
Mildew

In the environment, there is always a multicellular organism somewhere, either in the air or on various surfaces. This mold grows where there is a wet surface. They being microorganisms have the ability to grow and form a population of organisms; often referred to as a microbial growth. Such a microbial growth entails a rapid and simple process of binary fission. The microbial growth of fungus requires temperatures of 200 -300C and Optimum pH 6.0 and below.


Microbial growth takes place best with correct atmospheric pressure. Acidity levels limit most microbial growth organisms.


When you notice the presence of this menace in your house/home, it is imperative that you do some serious mold cleanup. You need to get rid of this organism as soon as you can. The most common type of fungus is mildew. During mold cleanup, it is usually hard to distinguish between dirty surfaces from mildew. A simple drop of household bleach and a water solution can do the trick. Mildew usually begins as a single spot, often black in color, but usually grows into a big colony. Mildew does not cause rotting of your property unlike the other types of microorganisms.

Here are some guidelines that are necessary before and during your mold cleanup:

Wear the right type of clothes, which can be disposed of because the organisms can stick on the clothing.
Wear goggles so as prevent fungal molds from getting in contact with your eyes.
Keep the room ventilated as you work. This will provide you with proper air circulation. Make sure the windows are widely opened.
Wrap and tape the garments that require outdoor cleaning like carpets. Use double garbage bags for excessively infested fabrics/items for disposal.
To control airborne fungal spores, moisten areas that are hard to reach as you work.
Also during mold cleanup, we apply mitigation. Mitigation is the removal of fungal infestation from a home or business premises to prevent possible complications of the individuals occupying the building. Mitigation involves fixing of leaking water systems and cleaning bacteria infested areas. During mold cleanup and mitigation, reduction of the level of exposure to the organism is paramount. At times, mitigation requires you do away with the various items in the environment.


To determine if a place needs mitigation, one needs the services of an environmental hygienist. An environmental hygienist considers some activities with the aim of protecting people. An environmental hygienist maintains an acceptable standard of environmental quality. The environmental hygienist looks at unsanitary water supplies and wastes disposal systems. Visit http://www.SERVPROashevillewest.com for more information on mold removal and remediation.

What To Do When You Find Mold In Your Asheville, NC Home?

4/6/2017 (Permalink)

What To Do When You Find Mold In Your Asheville, NC Home?

There are quite a few things that may happen when someone finds mold in their home, and they must contact someone who will help them at once. This article explains how someone in an Asheville NC home may deal with the weather that causes the problems that are found. There are many different things that may be done to ensure the home will be clean and healthy, and an environmental hygienist will ensure the homeowner has all the help they need when bringing their home back to normal.

#1: Finding Mold Or Mildew

Any microbial growth in the home will hide away from where the owner cannot see it, and the hygienist must be asked into the home to find it. There are quite a few places where the growths may be found, and the environmental hygienist must have time to uncover each problem before the house is cleaned. They will ensure the home has been inspected properly, and they will use the information they gather to keep the house clean.

#2: How Do They Clean Everything?

They will use the most-advanced technology in the industry to ensure they are cleaning every part of the building, and they will use everything from hand tools to special solvents that will help the home come clean. There are quite a few people who are searching for a way to clean off a fungus they have found on their property, and they cannot do it alone. There are special cleaners that were made for such a purpose, and it is important that everyone who is ready to clean their home calls a professional in North Carolina who knows how to help.

#3: How Long Does The Process Last?

The process of cleaning the home may last several hours, and someone who is cleaning will let the homeowner know how much longer it may take. They know that they need a bit of time to complete the process, and they will work slowly to ensure nothing has happened in the interim. They will check on all the work they have done, and they will not certify the house clean until they have inspected it a second time. The inspection will tell the company if here is anything else they need to do, and the inspection will take the customer through the process of ensuring the house is clean.

#4: They Test Air Quality

The air in the house must be tested when mold is found, and the microbial growth that is cleaned from the house will take with it the musty smell that made the house seem unhealthy. The air quality tests may be done many times over, and there are quite a few people in Asheville NC who need to have the cleaning done as soon as possible. They must get the air back to normal because it is making someone in the family sick, and it will cause issues that the family cannot correct without help from a doctor.

#5: Maintaining A Clean Home

The house must remain clean during the year if the homeowner wishes to breathe clean air. They will find this much easier to do when they are using a simple system that was devised for them to ensure the home will remain clean. There may be an inspection once a year to check for a fungus or mildew, and the company will offer a number of other options that ensure the customer may rid themselves of anything unhealthy that is in the house. The house will stay clean when it is inspected once a year, and the owners will grow accustomed to using the technique that were taught to them by the people who work on the staff. The hygienist will send someone they trust to the house to check every nook and cranny, and they will do any cleaning that is needed when the house has started to build a new growth that is unhealthy for the family.

North Carolina residents must ensure they are using their good judgment when having their home cleaned, and they may call a company that will check every part of the house to ensure it is free of all growths. There are quite a few growths that will cause problems for the homeowner, and someone who smells a bad odor in the air must take steps to ensure it has been removed. They will notice how simple it is to keep the house clean, and the job will be done as quickly as possible. Visit http://www.SERVPROashevilleeast.com for more information on mold removal and remediation.

Handling Mold in Your House

2/23/2017 (Permalink)

Handling Mold in Your House

Moldy spots can be a huge problem for homeowners in Asheville NC. It discolors drywall and tile, it blackens your deck and makes your hardwood floors look scummy. More importantly it can adversely affect your health. The microscopic spores that are released by a moldy house can give you a host of symptoms from a runny nose to a serious fever.

Nearly all houses in North Carolina get fungal infestations from time to time, this article will try to explain how to prevent a bad fungal problem and what to do if you already have one.

Minor moldy stains are easily removed using household cleaning products. Try to clean up a big fungal spot can affect your health, especially if you suffer from allergies or have a weakened immune system. If a large issue is discovered, it is recommended that you rigorously protect yourself from inhaling the spores. This usually takes the form of a spore resistant gas mask.

Fungal spores are all over. It is a species of fungus that reproduces by releasing microscopic spores that lead to microbial growth. You are inhaling fungal spores or milldew spores right now as you read this.

The visible type of mold, called mildew, is easily recognizable. It begins as very small, dark spots then grows into larger colonies. It is that black material seen in the grout lines of your shower and outdoors deck boards, often found in shady areas. A surface that is mildewed is often difficult to tell apart from one that is dirty. To see if it is moldy, simply dribble a few drops of bleach on the spot. If the area lightens in a couple minutes, you probably have a mildew problem. Otherwise, the surface is just dirty.

High concentrations of colonies are easy to smell. If the characteristic stale smell of mold is ascertained, look for it under carpets, damp areas, in dark places and under the house. Try to clean these areas quickly with bleach, as if left untreated the infestation will likely spread and require professional help from an environmental hygienist who are located throughout North Carolina.

Removing moldy spots from areas larger than a couple square feet is more difficult. Special precautions must be taken in order to fully protect yourself. The precautions serve not only to protect contamination of the rest of the souse but also to protect you from inhalation of damaging fungal spores. Below are listed some precautions you can take.

• Older clothes should be worn that you can throw away after cleanup.

• Respiration apparatus should be worn, as well as rubber gloves and goggles.

• Ensure that you are in a well ventilated area.

• Make an air tight seal around the moldy washing materials after you are done cleaning and are ready to throw them out.

• Moisten the moldy places with a spray bottle while you work. This will act as a retardant of the spores spreading

• Turn off the AC and heater to prevent lose spores from circulating around the house and establishing new colonies.

If you need to open up the wall in order to remove a moldy spot, be liberal in your removal of areas outside the visibly affected parts. Colonies start very small and microbial growth is impossible to see. It is likely that the seemingly clear areas around a mold stain are also infected and need to be removed as well. Obviously, be safe when using power tools to removes sections of wall and use caution when working near power outlets.

If moisture damage has been neglected for a long period of time, it is likely there will be rot in these places. It is essential remove all portion of rotted areas and replace them as these are beyond repair and will often foster the spread of more colonies.

Fungal infestations are a common problem in households and can get bad very quickly. This can have repercussions on you finances and your health. It is important to watch vigilantly for the beginnings of an infestation or you may find yourself having to call an environmental hygienist. When dealing with an insurmountable problem or issue with any type of fungus, you can always call professionals. Many are located in Asheville NC as well as throughout North Carolina. Visit http://www.SERVPROashevilleeast.com if you suspect mold is in your home or business.

Is There A Moldy Odor In Your House, It Could Be Mold

10/17/2016 (Permalink)

Mold damage, like anywhere else, starts with that smell. It's produced by microbial volatile organic compounds or MVOCs.

Mold Damage - That Musty Odor

In many cases, the first sign that you have mold is the smell. Most people call it "that musty odor." Unfortunately, if you smell it, that means you are already breathing it in.

Fairview mold damage, like anywhere else, starts with that smell. It's produced by microbial volatile organic compounds or MVOCs. The health problem with mold spores is toxic compounds called mycotoxins. These are what can cause minor and eventually, major health problems.

Why is the musty odor the first sign? Because mold doesn't start to grow in the middle of a coffee table in the middle of a living room. It gets started in the dark, hidden in places like under carpets, inside walls and unfortunately in HVAC systems. SERVPRO inspectors and technicians have the training and access to equipment and cleaning agents to scrub and eliminate mold from your business or home. The only way to get rid of the smell is to get rid of the mold. If the source of the spores is in carpets, floors or hidden behind walls, then our technicians will be able to use anti-fungal cleaning agents to kill the spores.

Before that is started, our professionals will put into place dehumidifiers to begin reducing the moisture of the affected property and surrounding area. Exhaust fans are placed at exit points to blow all mold released by the cleaning process outside the building. If our inspectors find that your HVAC system has not been compromised, then all vents will be sealed to prevent contamination during the cleaning process. If the HVAC has been compromised, then our technicians will need to use anti-fungal foggers to 'scrub' every inch of your air ducts. Fans will be set up to force air through the system to blow all trace of the spores out and thoroughly dry the duct work as well.

Mold is a serious threat far beyond staining walls, ceilings, and carpets. An infestation will keep you out until it has been cleaned, inspected and approved for occupation. With no rain forecasted until the weekend, now is the perfect time to call us here at (828) 255-4535 if you think you may have a mold problem. SERVPRO of Asheville East is prepared to help you restore your home or business to its original state.

Fairview Mold Damage - Advice on Preventing winter Mold Damage in Fairview

4/29/2016 (Permalink)

Don't let mold damage you! SERVPRO of Asheville East will make your mold infestation "Like it never even happened."

Fairview Winter Mold Damage Prevention Tips

Most homeowners know that winter is a great time for mold in Fairview, but not such a great time for routine care and maintenance. If you own a property in Fairview, mold damage should be something that you keep an eye out for all year round, but particularly during the coldest months of the year. 

If you live in an area which is prone to rain and snow, the risk is even higher. So, it is very important to put Fairview mold prevention measures in place before the winter arrives. For homeowners who are already tackling chronic mold, the only solution is to call in an expert restoration team. They will be able to identify the source of the problem, remove the mold, and give valuable advice on how to prevent repeat appearances in future. 

These handy tips and tricks for preventing Fairview mold damage in the winter will show you the basics and help you protect your home. 

Circulate the Air 

For bathrooms and kitchens, especially, good ventilation is essential. The moisture produced by bathing and cooking should not be allowed to hang around in the air. High-quality ceiling fans are an effective and affordable way to prevent mold damage in Fairview homes. 

Inspect Pipes Regularly 

Every 2-3 months, take a couple of minutes out of your day to inspect the pipework inside your property. A visual inspection is fine; just keep an eye out for cracks, corrosion, and rust. You need to have identified and solved potential leaks even before they occur. Monitoring pipes is the best way to do this. 

Keep Gutters Clean 

You’d be surprised at how much damage blocked and broken gutters can cause. If guttering does not function properly, water may be directed straight downwards, towards the foundation of the property. This can quickly turn into a serious problem and even cause flooding. Issues with mold are also likely to develop, so keep your gutters clean. 

Protect Crawlspaces 

It can be tricky to safeguard crawlspaces against moisture and mold damage because they sit so close to the ground. When it rains or snows, this area is the first to feel it. As such, it can develop serious problems with mold and water damage. However, laying heavy roofing paper or polyethylene film over the soil can be an effective way to cut off the moisture. 

Locally Owned Company with National Resources

For more information and advice on preventing winter mold damage, pick up the phone and call SERVPRO of Asheville East on (828) 255-4535 today. 

Asheville Toxic Mold Basics

6/11/2015 (Permalink)

Large amounts of mold can create pathogens that reduce indoor air quality.

Toxic Mold Basics

Many people are concerned about Asheville mold and the effects it can have on health. Large amounts of mold can create pathogens that reduce indoor air quality. However, a small amount of mold in the home is typically not harmful to one's health.

What Is Mold?

Mold is a type of fungus that grows in damp, warm places. However, the spores can thrive for a long time in a dry place. That is why the airborne spores will also need to be cleaned.

It is impossible to completely eliminate mold because it is found in nearly every building. If there has been a high concentration of mold for several weeks or months, then this can be dangerous to health. A small pipe leak, flooding, damp floors and ceilings can facilitate Asheville mold growth.

All types of mold can be toxic if they grow in a very high concentration. In fact, some types of mold create toxins that can be damaging to one's health. Aspergillis and black mold are two of the most common types of toxic mold.

Where Does Mold Grow?

Asheville mold can grow in any place that is poorly-ventilated and damp. Basements, kitchens, bathrooms and leaks around air conditioners, water heaters, windows and roofs are examples of areas where mold often grows. It can also grow in wood, carpet, ceiling tiles, upholstery and drywall. Mold spores can cling to pets and clothing. Heating and air conditioning systems can also circulate the spores throughout the building.

How Does One Get Rid Of Mold?

You can prevent mold from accumulating in your home by keeping it well-ventilated and dry. If you have a plumbing leak, then you will need to get it fixed as soon as possible. Contact a professional mold remediation if you notice a dusty odor or dust spores.

Care has to be taken when removing mold from a hard surface because spores can be released into the air. In many cases, porous surfaces that have mold will require replacement. This includes things like ceiling tiles, wallpaper, carpet and drywall. A complete renovation may recommended if the mold infestation is inside of the structure of the building.

Asheville mold remediation can be expensive, but the cost is worth it. You can make a mold problem worse by attempting to clean it. It is best to call a professional so that you can ensure the mold is removed in the proper way.

Understanding Mold

Some restoration companies advertise “mold removal” and may even guarantee to remove all mold. This is a fallacy because removing all mold from a house or business is impossible; microscopic mold spores exist almost everywhere, both indoors and outdoors. Here are the facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.